Coolant off

[Metric]

Could any body give a help.I want to twist the post to get the coolant off the same line with the z rapit retract and G80.

like this:"

G40X3.1524Y6.1319

G0Z.5M9.......

G91G28Z0M5"

And

"G00 X.7Y8.8

G98G84Z-1.4R-.7F4.62

G80M9.....

G91G28Z0M5".

I'm using Haas post for Mc9

Thanks in advance.

Jonh.

[jhjr]

I think all you should have to do is move scoolant up one line.

This is from mpmaster V9.

 

from

code:

---

pretract        #End of tool path, toolchange              

sav_absinc = absinc

absinc = one

sav_coolant = coolant

coolant = zero

#cc_pos is reset in the toolchange here

cc_pos = zero

gcode = zero

pbld, n, sccomp, psub_end_mny, e

pbld, n, sgabsinc, sgcode, "G28", "Z0.", *sm05, scoolant, e ----------------

#if lock_codes = 1 & rot_on_x, pbld, n, *sunlock,

---

to

code:

---

pretract        #End of tool path, toolchange              

sav_absinc = absinc

absinc = one

sav_coolant = coolant

coolant = zero

#cc_pos is reset in the toolchange here

cc_pos = zero

gcode = zero

pbld, n, sccomp, psub_end_mny, scoolant, e ------------

pbld, n, sgabsinc, sgcode, "G28", "Z0.", *sm05, e

#if lock_codes = 1 & rot_on_x, pbld, n, *sunlock

---

Correct me if I am wrong guys. I'm kind of a hack post editor.

Always make sure you save a copy of your original post for backup.

[Guest]

Metric,

 

I would suggest grabbing a copy of the MPMaster, and try using that instead, if has a switch for turning off the coolant with the last Z move.