G81 Only Posting 1 hole...

[Randy Morton @ Clem Industrial]

Hey all,

 

In meh mill post, if I select G81 drill with no custom parameters, and I have 8 holes (just example) it will only post the initial hole.

 

code:

---

G90 G54 X6.037 Y1.6176 S178 M03

G43 H175 Z2.

G81 Z-1.5 R.25 F4.28

G80 G0 Z2.

---

But! If I post out with a G83, I get all 8 holes. I dont know where the difference lies in the post as the two post block look virtually identical...

 

code:

---

pdrill$          #Canned Drill Cycle - G81

pdrlcommonb

if drl_prm1$, pdrlcst$

else,

[

result = mr4$ + mr5$ + mr6$ + mr7$ + mr8$ + mr9$

if result > 1, result = mprint("ERROR - MULTIPLE MACHINES SELECTED IN MISC REAL SECTION. PLEASE CHECK AND REPOST")

pcan1, pbld, n$, *sgdrill, pdrlxy, pfzout, pcout, pindexdrl,

prdrlout, [if dwell$, *dwell$], *feed, strcantext, e$ #removed *sgdrlref, 09.21.09 RDM

]

pcom_movea

 

ppeck$ #Canned Peck Drill Cycle - G83

pdrlcommonb

if drl_prm1$, pdrlcst$

else,

[

result = mr4$ + mr5$ + mr6$ + mr7$ + mr8$ + mr9$

if result > 1, result = mprint("ERROR - MULTIPLE MACHINES SELECTED IN MISC REAL SECTION. PLEASE CHECK AND REPOST")

pcan1, pbld, n$, *sgdrill, pdrlxy, pfzout, pcout, pindexdrl,

prdrlout, *peck1$, [if haas, *peck2$, *peckclr$], *feed, strcantext, e$ #removed *sgdrlref, 09.21.09 RDM

]

pcom_movea

---

Any ideas why this might be? tks!

[ajmer]

look at where the secondary holes are coming from

ppeck_2$

and

pdrill_2$

[Randy Morton @ Clem Industrial]

It was in pdrill_2$ telling it to auto-redirect back to pcom_movea. Weird.

 

Thanks for the help, Ajmer!

[ajmer]

no problem