Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

errors when posting

Sandybar

By Sandybar,
in Industrial Forum

 Share

Recommended Posts

Sandybar Newbie

Sandybar

Posted
Posted

I've been using this pretty much fail proof post for several years now. But all of the sudden it is posting with errors or so it says. When I post a dialog box comes up and says I have errors in my post and ask if I want to veiw the errors. I go to view and it has about 25 errors. This came up on a simple facing program.

 

Anybody else experience this?

 

X4MU3

 

Thanks

Link to comment
Share on other sites
Sandybar Newbie

Sandybar

Posted
  • Author
Posted

Here is the text i get.......

 

 

6 Sep 2010 02:54:55 PM - <0> - Report created.

16 Sep 2010 02:54:55 PM - <2> - Initialize posting log file

16 Sep 2010 02:54:55 PM - <2> - Using MP run version 13.00 and post components version 10.00

16 Sep 2010 02:54:55 PM - <2> - Initiate opening the post processor file(s).

16 Sep 2010 02:54:55 PM - <2> - Post processor file name: C:MCAMXMILLPOSTSMORIHSM.PST

16 Sep 2010 02:54:55 PM - <2> - The post processor file has been successfully opened.

16 Sep 2010 02:54:55 PM - <2> - Post version information (input):

16 Sep 2010 02:54:55 PM - <2> - UPDATEPOST Version 13. was used to modify this file.

16 Sep 2010 02:54:55 PM - <2> - The file was modified by this product on 24 Nov 09 06:51:15

16 Sep 2010 02:54:55 PM - <2> - The post was written to run with Mastercam Version 13.

16 Sep 2010 02:54:55 PM - <2> - The post product type is Mill.

16 Sep 2010 02:54:55 PM - <2> - Initialization of pre-defined post variables, strings, postblocks was successful.

16 Sep 2010 02:54:55 PM - <2> - Search for defined post variables, strings, postblocks was successful.

16 Sep 2010 02:54:55 PM - <2> - PST LINE (585) - Label has not been defined[20]

16 Sep 2010 02:54:55 PM - <2> - PST LINE (673) - Label has not been defined[9]

16 Sep 2010 02:54:55 PM - <2> - PST LINE (676) - Label has not been defined[9]

16 Sep 2010 02:54:55 PM - <2> - PST LINE (953) - Label has not been defined[9]

16 Sep 2010 02:54:55 PM - <2> - PST LINE (956) - Label has not been defined[3]

16 Sep 2010 02:54:55 PM - <2> - PST LINE (981) - Label has not been defined[11]

16 Sep 2010 02:54:55 PM - <2> - PST LINE (983) - Label has not been defined[11]

16 Sep 2010 02:54:55 PM - <2> - CONTROL DEFINITION - - Post variable 'met_ltol$' was re-initialized from 0.002 to 0.01

16 Sep 2010 02:54:55 PM - <2> - CONTROL DEFINITION - - Post variable 'helix_tol$' was re-initialized from 0.0005 to 0.0001

16 Sep 2010 02:54:55 PM - <2> - CONTROL DEFINITION - - Post variable 'met_helix_tol$' was re-initialized from 0.005 to 0.001

16 Sep 2010 02:54:55 PM - <2> - CONTROL DEFINITION - - Post variable 'dec_seq_right$' was re-initialized from 3. to 0.

16 Sep 2010 02:54:55 PM - <2> - CONTROL DEFINITION - - Post variable 'arctype$' was re-initialized from 2. to 5.

16 Sep 2010 02:54:55 PM - <2> - CONTROL DEFINITION - - Post variable 'arctypexz$' was re-initialized from 2. to 5.

16 Sep 2010 02:54:55 PM - <2> - CONTROL DEFINITION - - Post variable 'arctypeyz$' was re-initialized from 2. to 5.

16 Sep 2010 02:54:55 PM - <2> - CONTROL DEFINITION - - Post variable 'larctype$' was re-initialized from 2. to 5.

16 Sep 2010 02:54:55 PM - <2> - CONTROL DEFINITION - - Post variable 'larctypexz$' was re-initialized from 2. to 5.

16 Sep 2010 02:54:55 PM - <2> - CONTROL DEFINITION - - Post variable 'larctypeyz$' was re-initialized from 2. to 5.

16 Sep 2010 02:54:55 PM - <2> - CONTROL DEFINITION - - Post variable 'breakarcs$' was re-initialized from 1. to 0.

16 Sep 2010 02:54:55 PM - <2> - CONTROL DEFINITION - - Post variable 'breakarcsxz$' was re-initialized from 1. to 0.

16 Sep 2010 02:54:55 PM - <2> - CONTROL DEFINITION - - Post variable 'breakarcsyz$' was re-initialized from 1. to 0.

16 Sep 2010 02:54:55 PM - <2> - CONTROL DEFINITION - - Post variable 'lbreakarcs$' was re-initialized from 1. to 0.

16 Sep 2010 02:54:55 PM - <2> - CONTROL DEFINITION - - Post variable 'lbreakarcsxz$' was re-initialized from 1. to 0.

16 Sep 2010 02:54:55 PM - <2> - CONTROL DEFINITION - - Post variable 'lbreakarcsyz$' was re-initialized from 1. to 0.

16 Sep 2010 02:54:55 PM - <2> - CONTROL DEFINITION - - Post variable 'helix_arc$' was re-initialized from 2. to 0.

16 Sep 2010 02:54:55 PM - <2> - CONTROL DEFINITION - - Post variable 'lhelix_arc$' was re-initialized from 2. to 0.

16 Sep 2010 02:54:55 PM - <2> - CONTROL DEFINITION - - Post variable 'rotfeed4$' was re-initialized from 2. to 1.

16 Sep 2010 02:54:55 PM - <2> - CONTROL DEFINITION - - Post variable 'rotfeed5$' was re-initialized from 3. to 1.

16 Sep 2010 02:54:55 PM - <2> - CONTROL DEFINITION - - Post variable 'lrotfeed4$' was re-initialized from 2. to 1.

16 Sep 2010 02:54:55 PM - <2> - CONTROL DEFINITION - - Post variable 'lrotfeed5$' was re-initialized from 0. to 1.

16 Sep 2010 02:54:55 PM - <2> - CONTROL DEFINITION - - Post variable 'peckacel$' was re-initialized from 0. to 1.

16 Sep 2010 02:54:55 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.

16 Sep 2010 02:54:55 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.

16 Sep 2010 02:54:55 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.

16 Sep 2010 02:54:55 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.

16 Sep 2010 02:54:55 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.

16 Sep 2010 02:54:55 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.

16 Sep 2010 02:54:55 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.

16 Sep 2010 02:54:55 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.

16 Sep 2010 02:54:55 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.

16 Sep 2010 02:54:55 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.

16 Sep 2010 02:54:55 PM - <2> - Successful completion of posting process!

Link to comment
Share on other sites
Paul Decelles Rookie

Paul Decelles

Posted
Posted

That addresses the single axis rotation error but it is not going to address the missing variable initialization(s) in your post.

 

These errors:

 

16 Sep 2010 02:54:55 PM - <2> - PST LINE (585) - Label has not been defined[20]

16 Sep 2010 02:54:55 PM - <2> - PST LINE (673) - Label has not been defined[9]

16 Sep 2010 02:54:55 PM - <2> - PST LINE (676) - Label has not been defined[9]

16 Sep 2010 02:54:55 PM - <2> - PST LINE (953) - Label has not been defined[9]

16 Sep 2010 02:54:55 PM - <2> - PST LINE (956) - Label has not been defined[3]

16 Sep 2010 02:54:55 PM - <2> - PST LINE (981) - Label has not been defined[11]

16 Sep 2010 02:54:55 PM - <2> - PST LINE (983) - Label has not been defined[11]

 

Tell you exactly where to look to determine what is missing. For example, the first error:

 

16 Sep 2010 02:54:55 PM - <2> - PST LINE (585) - Label has not been defined[20]

 

tells you to look at post line number 585, column 20. This will be the beginning of a variable. Chances are, all seven of these errors likely point to the same variable, which has not been initialized or formatted. I'm sure that if you post the entire line for each of the errors here one of the many post experts here will be able to tell you how to fix it.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Useful Links

Contact Info

Subscribe to eMastercam News

 

Legal

Privacy Policy

Store Terms & Conditions

Forum Guidelines

Follow us

×
×
  • Create New...