V9 Problems

[Smitty]

Does anyone know how to fix some of my problems

1-Toolength offset, pick say tool #1 Tool #2 displays in the Length offset box

2- If I have say 10 operations in the manager

Sometimes only 9 operations will post,after selecting all.

I seem to have this with V9 If I post using V8

everthings fine,would like some advice Thanks

[Fig sign]

Hi ,Smitty!

Regarding to the second point try to use old trick

check in all jobs and with the right mouse click options->change NCI destination

I wish that helps.

[Lucky 7]

Smitty,

 

Go to job setup change the Tool Offset Register to

Add length 0 Diameter 0. You can change your config. file to reflect this also.

 

Thats under screen/configure/NCsettings/Operation defaults. pick the default file you work out of, then right click Job setup.

 

Hope this helps

[Keith Graydon]

Hiya,

 

Do what plastav sez for the posting prob.

 

for the other prob do this:

 

Got to Toolpaths/job setup. Look on the right side of the dialog in the Tool Offset Registers section. Be sure to choose the From Tool option. NOT the ADD option. This may be whats happening

 

HTH

-KLG