acramatic 950

[Ariel Gubatina]

Does anybody have a post for a cincinnati maxim 630 horizontal machine with acramatic 950 control?

[McRae]

I don't - anyone else?? I suspect that this new user has already searched thru the FAQ, Web guidlines - and been refered to this website by his dealer.

 

(This is not a flame, just an observation...)

[MACHINEMASTERG]

i dont have one but i bet your dealer could help you

[Tony]

Sorry...

All Verticals here.

[Roger Martin from CNC Software]

Try the MPA2100E.PST that was on the v9 CD

It was based of the MPFAN which allows for Vertical/Horizontal configurations.

 

You will need to alter (at least) these post switch settings ->>

 

code:

---

vmc : 1 # 0 = Horizontal Machine, 1 = Vertical Mill

rot_on_x : 1 # Default Rotary Axis Orientation, See ques. 164.

# 0 = Off, 1 = About X, 2 = About Y, 3 = About Z

rot_ccw_pos : 1 # Axis signed dir, 0 = CW positive, 1 = CCW positive

index : 0 # Use index positioning, 0 = Full Rotary, 1 = Index only

ctable : 5 # Degrees for each index step with indexing spindle

---

It does not have any support for the pallet system that you have, but your Dealer should be able to help you out with that.

[mikeb]

i have one at work, i'll check tomorrow. sorry, at home right now.