lathe and post extension

[ek79989]

Can someone suggest a solution to my little problem? I have created the toolpath and saved the post but when I take the floppy to my machine it will not find the post there. Machine looks for file with extension *.pmc. When I edited the post as *.pmc it finds it ok but on verify machine displays bunch of errors. The post I was using is mpfan and my machine is Fryer Machine with Fanuc controls. Thanks

[Guest CNC Apps Guy 1]

In your post at your general output settings, down at the bottom of that section create this line;

 

sextnc .pmc #NC extension override

 

This will set uour file extention of your G-Code file.

 

HTH