c-axis

[cncman74]

I want to activate G112 and G107 but not sure how. Fan.pst says mi4. when i find mi4 it is this

 

#3304. Default lathe miscellaneous integer variable 4 (mi4)? 0

 

when trying to mill 2 flats on a part i can only get it to process and cut one flat and not the other. i know there is a trick to this. i'll upload what ia m talking about in MC9 folder

file is ORIFICE478CAXIS.mc9

[Allan Brown]

Found under the Misc Values button in your operation parameters for Face Ctr and C-Axis Ctr. Misc Integers are on the left side. 4th one down should be set to 1.

[cncman74]

thanks. i was thinking it was in the post processor.

 

i got it to post for the one flat but i can not get it to due the 2 flats. when i select chain it doesn't notice the other flat and only makes one. when I try to do it again and select chain on second flat or even partial it only does the one flat or nothing.