Saving .NC files

[YNTO]

When I open a MC9 file and post. My NC file doesn’t prompt to save this file in the same directory as my MC9 file. I want to keep both files in the same directory. Is there a way to set it to default to the same place as my MC9 file?

 

Jim G.

[jeff]

You need to go to screen/configure and set the correct path there.

It's under the "Files" tab.

Click on nc on the left,and then under that window,select the data path.

 

[ 03-13-2003, 11:09 AM: Message edited by: jeff ]

[YNTO]

So Mark will I need to do this every time I open a MC9 file?

[YNTO]

Sorry. I ment Jeff, not Mark.

[Roger Martin from CNC Software]

This topic has been covered several times

(in just the last few weeks!)

 

Edited version of a post from James Meyette that was posted 03-05-2003

 

 

Start up the SETDIRS C-Hook.

 

Set the selected directories to Project Directory.

Select MC9, and NC, then whatever converters you wish.

 

Once you click OK, the paths set with the C-Hook are active.

Now if you go to File Get, you will get whatever is in that folder.

When you post the NC files will be written to that folder.

 

You'll need to run SETDIRS every time you work on something else.

[Guest CNC Apps Guy 1]

Thanks for the props Roger!