Importing a Tool Library

[Ron_Roy]

Howdy,

I am trying to import a Tool Library from a previous project (I'm using Ver. 8 - Level 3) , and when I try to look at it all the tool numbers are completely different and there are copies of the same tools in the library. Is there a way to use the old library and keep the tool numbers/offsets etc. as it was originally generated?

Thanks

Ron Roy

 

[krystof]

Ron

In your job setup page in the toolpath configuration section uncheck assign tool number sequentially and that should do it.

[Luther_Heggs]

Yep - he's right.

[Ron_Roy]

Thank you for the help!

Ron Roy