ug forum like mcam forum!

[antelopemy]

Is there a ug forum like this mastercam forum?

i search 2 of them on the website ,but they are not active, 100 questions posted ,only around 10 got the answer and the answer is very late........very bad

[Tony]

Try switching From Crack UG to

Crack SW you will have less questions to ask.

[antelopemy]

i,m not mean that i posted 100 questions for crack, they are from other user.

[Brendan P]

Mastercam forum is #1.....

How could there possibly be a forum like it?

[McRae]

The reason there are no other user forums like this one for UG, ProE, ETC - is Maintenance Fees.

 

With Maintenance comes live professional personal support that only 3 Million Dollars can bring, making a "FREE" users group un-neccessary.

 

As Mastercam does not come with the drawbacks that Maintenance also brings (Forced annual payments, back payment for any missed upgrades/maintenance, etc...) the user base, under the wing of a top notch software dealer, has put togeather a critical mass of help and be helped networking.

 

It has been said, "There can be only one..."

 

[ 04-09-2003, 12:42 PM: Message edited by: Andrew McRae ]

[Allan Brown]

MfgEng - That blurb would make for a killer eMastercam.com press release.

[chris m]

I see a Mastercam golf shirt in somebody's future...

[Guest CNC Apps Guy 1]

Not even I could come up with something that good. I think a Polo SHirt is in order too.

 

Mastercam shoudl use that in a Press Release. Especially the part about Maintenance Fees.

 

Great jab Andrew.

[Bullines]

Andrew's post deserves a resounding:

 

"True dat!"

 

[BernieT]

What a great explanation!!

 

Real insight.

 

Good going, Andrew

[kathy]

Actually there is an e-mail list for Ideas users. (I think you have to be a registered user to join - don't remember I joined so long ago from my SmartCam / Artisan days).

I've been thinking about un-joining, but every once in a while there is an interesting post that keeps my interest piqued. Great group of people just like this forum.

Of course, being Ideas users they are very skeptical of EDS / UG and I haven’t seen any UG users participate....

 

Kathy

[Jack Mitchell]

Andrew,

 

If Mastercam doesn't spring for the shirt then I will.

 

Well said big guy!

 

Regards, Jack