Bad drill code

[Mill Man]

Hi: I am running V7 and using fadalc.pst and the code comes out like this…

N136. (SPOT DRILLING CYCLE

N138. G81 G98 X1.6975 Y1.8323 Z-0.15 R00.1 F8.0

N140. X3.9545 Y1.8323 Z-0.15 R00.1

N142. X6.2115 Y1.8323 Z-0.15 R00.1

N144. X8.4685 Y1.8323 Z-0.15 R00.1

N146. X8.0091 Y4.2243 Z-0.15 R00.1

N148. X5.7521 Y4.2243 Z-0.15 R00.1

What can I do to stop the extra Zs and Rs?

 

[CycleTimeCharles]

Remove the "*" from the "depth" and "refht" variable from the pdrill_2 line in the post.