2D High Speed settings

[DavidSV]

I am trying to use some of the 2D High Speed toolpaths, but I am not getting satisfactory results. I am trying 2D Core Mill right now and I am getting a lot of extra entry and exit arcs in Z and XY. In the help file for the toolpath it illustrates a tool dropping down to depth, and feeding into the stock. I can not get my program to do this. Can someone explain how to get a toolpath without the entry and exit vertical arcs?

 

Attached is the pic from the help file and what I am getting.

 

Thanks

[cadman2112]

With 2D highspeed AFAIK, you cannot get that to change

[Mr. Wizzard]

I don't see your whole part, but if it is just like "facing" a part, try the Peel Mill and create your own geometry to drive it.

[Goldorak]

IMHO use dynamic 2d core instead of standard core mill, it's 100x better and faster