CLIMB OR CONVENTIONAL IN SURFACING

[nor750rr]

What controls climb or conventional milling when using surfacing (mc9) i know i can control it by machining angle

but this also reverses the path (finish parrell tool path). is it how you pick it or is it in how it is drawn?

[Hardmill]

What controls climb or conventional milling when using surfacing (mc9) i know i can control it by machining angle

but this also reverses the path (finish parrell tool path). is it how you pick it or is it in how it is drawn?

 

 

You can change to cut in only one direction and also machining angle 0, 90, 180 or 270 degs to

force it to start where you wants.

 

Once you play with them a bit it really just becomes second nature.

 

 

 

 

 

 

 

 

 

 

PEACE

[nor750rr]

yep, you right after palying with the angle and by adding a start point it will do what i want.

thanks.

 

ps. IT IS REALLY GREAT TO HAVE THIS FORUM!!!!!!!!!

[Hardmill]

 

 

ps. IT IS REALLY GREAT TO HAVE THIS FORUM!!!!!!!!!

 

Sure is, its always a great resource.

Some very smart ppl hear, especially the "post geeks"

 

 

 

 

 

 

 

 

PEACE