Make toollibrarys with a excelfile

[frostfritt]

I have saved my toollibrarymaker excelfile at our FTP server.

 

Write in your toolsuppliers tooldata at the inputsheet, save the outputsheet as txt and import that in your mastercam. Then you have a new toollibrary with individually calculated cutdata.

Support both mm and inch. Works with X4 and X5.

 

You need excel 2010.

 

Mastercam_forum/Tools/ToolLibmaker.zip

 

 

/frostfritt

[neurosis]

Frost,

 

Im going to play with this tonight. If it works you will be my hero! Ive been wanting something like this for ages. I cant thank you enough.

[delete]

Awesome!

Thanks Frost