9.1 Bugs

[Eazy]

Construction Depth keeps re-setting itself to zero. Stock allowance is not kept when a new path is created.

 

Any more from anyone else!

[cadcam]

I do not find these issues.

Sorry but not sure what to tell you.

 

My students don't find these trouble's either or I would hear about it or see it.

[camguy]

I noticed this also. it only happens when selecting any geometry for cutter paths. As soon as you say "done" after selecting any geometry for any kind of toolpath, the construction depth changes to zero. I tried turning off the tool plane but that didn't change anything. Running W2K pro V9.1

[ProductDevelopmentGuy]

Yes - this is a problem in V9.1. Virtually any time you go into the Operation Mgr or edit an operation's parameters, we left something in there that is resetting the depth to 0.

We are investigating this and a handful of other bugs that have been reported. We will in all likelihood be releasing a V9.1 Service Pack, but we don't have a firm date in mind yet.

 

PDG

[Eazy]

What is the appropriate channel to report bugs.

[ProductDevelopmentGuy]

[email protected]

 

PDG

[cadcam]

I guess I have to go back and look I do not remeber seeing any thing at this time.

 

Thanks for the headsup.

[Slick]

These, of course may be my lack of reading enough threads, as well as knowledge (such humility huh!), but here's what I've noticed so far:

 

Tool library. Sometimes I "re-edit" tool comments in the tool parameters after a program is complete. Ever since I've upgraded to V9.1, the new "Tool Comment" is by passed by the old one once I post process. (Like I said, it's probably just me.)

 

I thought I read a thread on this one, but not sure: File Loading and saving, seems like it takes longer.?.?

 

WCS Just a question, since we're on the subject, when changing a tool operation from one WCS to another, in V9.1 a new window comes up and asks if you want to associate the construction plane, leave it, and don't ask me this again. I've been having to reset my tool plane after this process as well. Any setting tips?

[Phil Herman OEP Machining]

Slick there is a new checkbox on the wcs page to reset tool plane and cplane when changing wcs. This is new in 9.1. I love it.

[peturk]

Has there been a "re-release" of v9.1 that incorporates some of the bug fixes that were detected in v9.1? Or do we just apply the update patches?

 

Thanks

[Slick]

Thanks Trodeman, very nice feature!