Just about had it

[Brendan P]

This is the second time that I created toolpaths in 9.1 and when I go to post them,not all op's are posting.

And yes I had them all checked off to post.

 

T01 spot drill

T02 drill

T03 e.m. (for c.bore)

1st. 2 tools post but not the 3rd.

However, if I just post the 3rd one alone,it mysteriously appears by itself! WTF

 

I know how you guys hate to hear it,but unless someone can direct me to what I might be doing wrong (which this never happened in SP1)I am ready to throw 9.1 right out the window.

I am all ears.....

[Scott Sizemore]

I've had this problem before to. It seems like to fix it I would select all the operations and change there NCI destination and the problem went away.

[Nominal]

check each of the ops to see what .nci file they are using.

[Jammer™]

Nice bike buckethead!

[chris m]

We just had the same prob; it is probably the NCI destination thing.

 

Select all

 

right click

 

Options

 

Change NCI Destination

 

Save

 

 

I hope that'll do it

 

C

[Brendan P]

Thank you for the help guys.

Unfortunatly because I have no friggin patience,I dumped the drill op's and started over.(it was not a big operations file)

And somehow it fixed it.

I will keep it in mind for the next time.

 

quote:

---

Nice bike buckethead!

---

Thanks Jammer,

I built the whole thing from scratch a couple of years ago.

The thing kicks A$$