Hass Helix bore Wear cutter comp errors

[delete]

Hi guy's

Our Haas is erroring out when I use

Helix Bore with wear.

It doesnt do it all the time and sometimes only on half the

Holes in the program?

But the underlying issue is the comp being turned off to late

And to late and only at the last location.

We are using the generic haas 4 axis post.

 

Are my setting's off somewhere?

 

I am at a point of only using Helix / Computer for the roughing and Circle mill / wear from center for bore sizing.

 

Thanks

Tony

[gcode]

this is a bug that came out in X5. It's fixed in the curret beta

the workaround is one op per hole.. or check start at center and perpendicular entry for multiple holes in one operation

[Guest]

change the entry exit arc sweep to 15 and use perpendicular entry