Hitachi Seiki lathe help!

[AllenT]

Hello averyone

I am new to the lathe

 

I got a program for the Hitachi Seiki lathe ( Seiki- Seicos 40L) the proggram below

 

is for an OD groove, I can not have the control to compensate for the OD groove tool, the

 

compensation's working fine with the rough and finish OD, is there anything to do with the

 

parameters of the control? It has its own conversational software with all the parameters.

MANY THANKS in advanced for your helps

Allen

%

O2000

(TL09/09)

N100 G50 S2000

N110 G28 U0.

N120 G28 W0.

N130 G30 U0. W0.

N140 M01

 

N9 T0900 M40

N150 G99 G96 S200

N160 G0 G142 X2.1414 Z-1.1168 M3

N170 G99 G1 X2. Z-1.1875 F.008

N180 X1.6

N190 X1.6374 Z-1.2063

N200 G0 X2.1414

G40

N210 G141 Z-1.3207

N220 G1 X2. Z-1.25

N230 X1.6

N240 X1.6374 Z-1.2313

N250 G0 X2.1414

N260 G40 Z-1.1168

N270 G97 G30 U0 W0

N280 M5

N290 M30

%