Thanks for your replies have a nice weekend everyone.

Thanks, I'll try the new toolpaths

I am trying to look for legend 3d toolpath, where can i find them? Please

I use Sandvik Coromill 210 to rough plunge the material out, thru features or steep surfs are candidate for this tool.

First full day with Mastercam 2019 has come to an end, not too bad as I though, have a good night everyone. Thanks

Where can I find the " command finder" ? overwhelmed by the new interface, also overwhelmed by the responds from the forum, thanks you all. Allen

Thanks Glenn, many more questions to come:-)

Hello everyone We just updated from X7 to 2019 yesterday, I am still wonder where are all my favorite funtions ? Planes, WCS .... Like other time after the update, total frustration to look for funtions that I have been using Thanks in advanved for your helps

We are plastic injection mold shop, that's the different, most of the parts...we would never see them again, but I got your point Mr Jparis and all of you..thanks. By the way, I ran into the an article ....either on MMS or Cutting Tool Engineering, they stated that most...they mean most...of the Mastercam programmers become programmer just by looking at other programmers at work, do you guys have that kind of luck? I Did not, I got nobody to look at except 1 day overview when update to the newer version! How about people in here? Would you tell your stories? Allen

Thanks, 1 more subject to learn from you guys!

Thanks for your helps guys, the dynamic rest mill seems not to be the option in this case to cleanup the small channel? The blend and dynamic core with 3/8 cutter would be the best for this,but if I have a lot of open pockets,the dynamic core mill is the only choice? I prefer not to have lots of operations if I don't have to. Once again thanks so much for your inputs.

Hello everyone! I have a square block with 2 open pockets ( colour # 9), what's is the most efficient way to rough them out? I have 2 tools, the 1" to rough out the wider channels, and the 3/8" to rough the small channels. What toolpath type do I have to have for dynamic rest mill with 3/8" cutter to go to the small channels? Thanks in advanced. Allen 29.MCX-7

Thanks JParis

OH, I found it in the tool page, it's called " reinitialize speed $ feed" but why takes extra step to update tool parameter compare to X6?

Hello everyone! I have a problem when changing tool, it will not update the feed and speed of the new tool, it's just sticked with all the parameter of the first tool only, anybody can help me on this? thanks in advanced Allen