HASS Renishaw TS-27R tool length probing routines

[westerfieldc]

I'm trying to add the broken tool macro to my output code, but I haven't been able to find the information on what the callouts mean.

 

Broken tool is G65 P9853 B1. T1. H0.2

 

What does the B1. stand for?

 

Also if I could see a example of how someone uses it in a actual program that would be great.

 

 

Thanks

Chris

[robk]

That does not look like a broken tool check routine. I may be completely wrong because I don't have a Haas, but that looks more like tool length setting macro.

 

B1. Set the length of the tool.

 

B2. Measure the radius/diameter of the tool.

 

B3. Measure the length and the radius/diameter of the tool.

 

Sample....

 

()

()

()

()

N20 T75 T76 M06

#3901 =#4114

/7G65 P9862 B1. T75 S3000

G65 P9862 B2. T75 D75 I[.500/2] E.005 S3000

G4

#160075=0.

G4

G65 P9863 T75 H-.010 S3000

G91 G28 Z0.

()

()

()

( Tool Name : T75_.500 DIA ENDMILL)

(FINISH 12.380R. ON BOTTOM BAND)

()

G20 G69 G80 G40 G49 G17 G90 G94

G10.9 X0 (SET RAD MODE)

G91 G28 Z0.

G28 X0. Y0.

M200 (C AXIS CONNECTION)

M108 M212 ( B AXIS UNCLAMP C AXIS UNCLAMP)

G53 G90 G00 B90.

G54.1 P11

G00 C338.

G00 G90 G54.1 P11 X15.4661 Y1.024

G97 S1001 M03

G43.4 H75 X15.4661 Y1.024 Z30. B90.

Z12.342

X12.5661 M08

G01 X12.5006 F12.71

G01X12.4727Y0.9503Z12.2683F14.01

G01X12.4448Y0.8766Z12.1946

.

.

.

.

G01X12.4857Y-0.9148Z12.2953F14.01

X12.5034 Y-.9615 Z12.342F14.01

X12.5701F14.01

G00 X15.4701

Z30. M09

M05

G49 (CANCEL TLO)

G91 G28 X0. Y0. Z0. B0. C0.

G65 P9863 T75 H-.010 S3000

G91 G28 Z0.

M01

()

()

[westerfieldc]

So it doesn't appear that you use any B with tool breakage?

[Guest CNC Apps Guy 1]

He used "Plunge CHecking" (P9863). This is length only.

[Guest CNC Apps Guy 1]

Do you have a Laser Manual (Hard Copy or PDF?). You may want to take a gander through there for what the optional inouts are and mean.

[westerfieldc]

They didn't leave a manual barely any training.

[robk]

Contact Renishaw and ask them to send you a .pdf copy of the manual.

[Bryan Johnson]

I have good documetation for the spindle probe (Inspection Plus), but nothing for the tool setter. Let me know if you find anything.

[Guest CNC Apps Guy 1]

I have good documetation for the spindle probe (Inspection Plus), but nothing for the tool setter. Let me know if you find anything.

 

 

Here you go. This is for an NC4 Laser which for the most part should do.

 

HTH

[Chris Rizzo]

Here is the manual for the ts-27r, and a word doc about calibration. I am crazy insane busy right now but will try and get back to you.

Tool Presetter Calibration Procedure.doc

[Bryan Johnson]

thanks for the info / docs.

The Renishaw programs included with Haas machines/probes are very comprehensive, but the documentation is very sparse.