Pointing to Tool Library

[k turk]

I think i am getting close to having X5 MU1 squared away; but i can't make my tool library setting stick. I am having to navigate and reselect my custom library each time i open mastercam. Reading through it seems like several people are having trouble with their libraries although it seems to be a corruption issue not the trouble i am having.

 

- In my configuration file, under File / File Usage / Tool Library I have navigated to the desired file. This setting stays.

- In the Operations Manager / Machine Group Properties / Tool Library / ! / Edit to desired file. This setting does not stay when reopening to a new Mastercam session or starting a new file

 

What am i doing wrong? From tests, it appears that the Operations Manager setting is the one that counts - but of course that is the one which doesn't hold.

 

TIA

[Tony35]

set the tool library in the MD that should make it stick

[k turk]

i did that; but it didn't take. Just fixed it though. I removed the unwanted file from the folder. Mastercam is now picking up the file i wanted.

 

thanks for the advice though . . . . on this and my other two recent questions.

[Tony35]

no problem

glad you got it fixed