scroll wheel

[jmarc]

I thing it's great that you can finally zoom in and out using the scroll wheel, but wouldn't it be nice if holding down the wheel allowed you to Pan? Any chance of a patch to do this?

[Andreas Stute - InterCAM]

Hi,

for v9.1 see this Topic:

 

http://www.emastercam.com/cgi-bin/ultimate...ic;f=1;t=005673

 

for v9.0 sp1 see this Topic:

http://www.emastercam.com/cgi-bin/ultimate...ic;f=1;t=005235

 

regards

Andreas

[cadcam]

All ready doing it now.

[Toolfab]

At the risk of being pulvarized, I make this statement... I have never used a chook while programming in MC. I have used one once to update my post and setup sheets, but never while running Mastercam. This sounds very cool and would like to use it. How do I make this chook start automatically when MC is opened? Thank you.

[Rekd™]

Geesuz, toolfab, WTH are you thinking asking a question like that? That's trade secrets, man!

 

 

Seriously, Screen, Configure, Startup, Kinda towards the bottom on the left.

 

HTH

 

'Rekd teh smartass

[Toolfab]

Thank you Rekd,

 

quote:

---

'Rekd teh smartass

---

Pauly teh dumbass

 

 

I got it, and Holy Cow is that awesome!!!!!!!

 

[jmarc]

Thanks Andreas.

Any chance of a 'Pan' function with this utility?

[jmarc]

Apologies for my last post.

I have found the function after reading the Readme.txt file.

[Toolfab]

to Andreas and intercam. After my first day with this chook, I wonder how I did this with out it.

 

Thank you Andreas