ALARM ON A THREAD CYCLE

[DODGERFAN]

%

O0000

(CUSTOMER - ADD CUSTOMER)

(PART # - 17P2C1238-5)

(MODEL # - 17P2C1238-5.MCX)

(PROGRAMMER - RAY

(PROGRAM NAME - LV1058380T)

(DATE - JUL. 20 2011)

(TIME - 1:42 PM)

(PROGRAM REV - N/C)

N1(TOOL - 5 OFFSET - 5)

(OD THREAD RIGHT INSERT - NONE)

N100 G0 T0505

N110 G97 S200 M03

N120 G0 Z28.7876

X3.687

N130 G76 P010006 Q1 R0

N140 G76 X3.3343 Z26.96 P764 Q40 R0. F.125

N150 G0 Z30.

N160 G28 U0. M05

N170 T0500

N180 M30

%

 

ANY IDEAS WHY THIS IS ALARMING OUT? NEVER HAD A PROBLEM WITH THE POST BEFORE, ONLY DIFFERANCE IS THIS IS A BUTTRESS THREAD. ANY HELP WOULD BE GREATLY APPRICIATED

[Roger]

Is the decimal point after your R on line 140 causing it?

[Dimensional Machine]

What alarm do you get?

 

The infeed angle is only 6 deg.

And as Roger says normally errors on threading canned cycles are from decimal points where the control does not accept them.

 

Allan