Custom drill cycle for Probe.

[Tinhman]

Good morning all,

I am working on my custom drill section for probing routine.

Here is what i got so far:

---------------------------------------

N48 (6MM PROBE)

G0 G17 G40 G80 G90 T48

G0 G28 G91 Z0

G90

M06

(MAX - Z3.)

(MIN - Z-.25)

G00 G17 G90 G54 X.1973 Y-.6581 S0 M05 <-------- need to take out spindle and M5 of this line

G43 H48 Z3.

G94

G65 P9832

G65 P9810 X.1973 Y-.6581 F120.

G65 P9810 Z-.25

G65 P9814 D4. S1. (PROBE BOSS/BORE SET ZERO)

G65 P9810 Z.1

G65 P9833

M05

G0 G91 G28 Z0.

G90

G0 G90 G53 X-60.

G91 G28 Y0

G90

(*)

--------------------------------------------------

My probe is alway #48 in all machines and I am using MPmaster for base.

I would like to take out the spindle and M5.

Could somebody please help me with this?

I know that i have to touch "ptlchg_com and ptlchg0$" section but it is way over my head right now.

Thanks in advance

[MIL-TFP-41]

could be much easier than you think. MPMASTER has a pspindleout and a pfspindleout that would be easy to modify....in fact they are already set up to not output during a rigid tap cycle.

It would look something like this

if not((opcode$ = 3 | opcode$ = 16) & nextdc$ = 3 & rigid_tap | t$=48 )), *speed, *spindle

[Tinhman]

Thank you very much.

One down, one more to go.

This is for my mazak machine:

 

-----------------------------------------

N48 (6MM PROBE)

G0 G17 G40 G80 G90 T48

G0 G28 G91 Z0

G90

M06

(MAX - Z3.)

(MIN - Z-1.)

G00 G17 G90 G54 X-1.9909 Y2.2425

G43 H48 Z3. T9 <-------------------------I want to remove this line

G94

G65 P9810 X-1.9909 Y2.2425 F120.

G65 P9810 Z.25

G65 P9814 D4. Z-1. S101.(PROBE BOSS/BORE SET ZERO)

G65 P9810 Z.25

M05

G0 G91 G28 Z0.

M01

(*)

--------------------------------------------------

I Would like to take out the line with "G43"

 

Thanks in advance

[MIL-TFP-41]

if not ( t$ = 48 ), pbld, n$, "G43", *tlngno$, pfzout, scoolant, next_tool$, e$

 

not sure if you need the parentheses or not.....

[Tinhman]

Thank you Sir!

I am OK for now.

This forum is WONDERFUL.