Multiple work offsets

[gotdzul]

I am new to this forum. If this question has already been posted, forgive me. I am trying to get X5 to post multiple work offsets.(I have figured out the multiple work offset part) I need the code to run each tool thru all the work offsets and not all the tools thru the first offset and then all the tools thru the second offset and so on. Thanks

[BenK]

You will need to transform each operation individually in order to do that.

 

 

If you use the search on the top right of the page you can search old posts on here.

 

Welcome to the forum.

[Scott Lundin Shopware Inc.]

On the transform type & methods page choose "operation type" to have each tool run thru all the work offsets before changing to the next tool.

Choosing "operation order" will run all the tools thru the first offset and then all the tools thru the second offset and so on so you end up with a lot of tool changes. Also choose "copy source operations" and "disable posting" otherwise the first part will still have all the tool changes. I actually like leaving this option off so it does make the first part complete so I can inspect it before making the other parts. I use it for quality control.

[MACHINEMASTERG]

MPSUBREP.PST we use this all the time make your first part prove it out then adjust the misc intergers for the other work offsets

[chad fisher]

MPSUBREP.PST we use this all the time make your first part prove it out then adjust the misc intergers for the other work offsets

 

 

Years ago I believe I got a Haas post from you to do the same thing. We just migrated to 15 and the post no longer works. Where can I locate this post? Doing all the translating is a pain.

 

Thanks

[Guest]

MPSUBREP link