Using Rapid Feed

[mayday]

Does this feature require a post mod? None of my Integrex posts seem to keep the machine in feed for clearance moves. This would save me from having to cancel G43.3 on every retract clearance move

It's under "Utility" in the parameter tree menu

[K2csq7]

Before...

 

N226 G43 H05 Z17.9623 M8
N228 G0 X5.4218 Z16.0403
N230 G1 Z15.6403 F50.
N232 X5.4383 Y-3.2125 Z15.6871 F16.
N234 X5.4535 Y-2.9626 Z15.7305
N236 X5.4675 Y-2.7121 Z15.7703
N238 X5.4787 Y-2.4934 Z15.8022
N240 G0 Z16.2022<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
N242 G1 X5.4218 Y-3.4614 Z16.0203
N244 Z15.6203 F50.
N246 X5.4383 Y-3.2125 Z15.6671 F16.
N248 X5.4535 Y-2.9626 Z15.7105
N250 X5.4675 Y-2.7121 Z15.7503
N252 X5.4787 Y-2.4934 Z15.7822
N254 G0 Z16.1822<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
N256 G0 X5.4733 Y-3.4637 Z16.0159

 

After...

N226 G43 H05 Z17.9623 M8
N228 G1 X5.4218 Z16.0403 F225.
N230 Z15.6403 F50.
N232 X5.4383 Y-3.2125 Z15.6871 F16.
N234 X5.4535 Y-2.9626 Z15.7305
N236 X5.4675 Y-2.7121 Z15.7703
N238 X5.4787 Y-2.4934 Z15.8022
N240 Z16.2022 F225.<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
N242 X5.4218 Y-3.4614 Z16.0203 F16.
N244 Z15.6203 F50.
N246 X5.4383 Y-3.2125 Z15.6671 F16.
N248 X5.4535 Y-2.9626 Z15.7105
N250 X5.4675 Y-2.7121 Z15.7503
N252 X5.4787 Y-2.4934 Z15.7822
N254 Z16.1822 F225.<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
N256 X5.4733 Y-3.4637 Z16.0159

 

Although they are not 5 ax moves, it works here...

[K2csq7]

Although they are not 5 ax moves, it works here...

Just changed that path to full 5 ax, the function still works for me.. using generic fanuc 5 ax post

[mayday]

Hmmmm, I might need a pst update that supports this option?