Dynamic Milling Back Feed rate

[Sandybar]

Using 2D Dynamic milling I put in 500 ipm in the back feed rate dialog box. It posts out F100.00 instead of F500.00. The machine definition max feedrate is 500.0 but still post out 100.0.

 

What do I need to do to get it to post out at 500.0 ipm? Using the editor to change all feedrates to 500.0 is not a good option.

 

 

Thanks in advance.

[Guest]

I'd look in the post itself for a max feedrate setting

 

That'd be my guess

[Guyinthedesert]

Using 2D Dynamic milling I put in 500 ipm in the back feed rate dialog box. It posts out F100.00 instead of F500.00. The machine definition max feedrate is 500.0 but still post out 100.0.

 

What do I need to do to get it to post out at 500.0 ipm? Using the editor to change all feedrates to 500.0 is not a good option.

 

 

Thanks in advance.

 

 

Did you regen the toolpath? If you just change the feed and repost, it won't change.

[Sandybar]

Looks like it was a needed regen, there was no RED X just assumed it was good to go. Geez what a way to start my Monday.......

 

 

Thanks

[Mike Whitten CAD/CAM Contractors]

I have also seen this issue, but only in X6. The op will accept a feedrate change and not go dirty. Mighty Dangerous.

 

Mike

[GF8er]

I have this problem all the time in x4 mu3. I've made it a habit to regen before posting.