need post help

[MSL]

Hi,

I'm using a modified Mplmaster post to program our Bridgeport EZ-Path lathe. I need to do my tool change before my rapid move position. How can I change that in my post? Below is the example of my G-code.

Using X5MU1

Thanks in advance.

 

Ara.

 

 

0001 RAPID ABS X0.6000 Z0.1000 <---------- need to switch line 0002 to 0001

0002 TLCHG I1 T01 01<---------

0003 SETRPM S0750

0004 RAPID ABS X0.7000 Z0.0140

0005 AUXFUN M8

0006 LINE ABS X-0.0150 Z0.0140 F.003

0016 RAPID ABS X0.6000 Z0.1000

0017 AUXFUN M5

0018 AUXFUN M9

0019 AUXFUN M0

[roland_1]

this doesnt look good for sure. it seems tah post receives data for rapid move before tool change. I am not sure but it looks like something is wrong with pre-post processing where parameters are mixed for order.

if you want send me your post and I can take a look for a weekend.

[MSL]

Thanks Roland. I will do that.