Renishaw Probe

[Guest]

I got a question from a customer this morning and since I'm not a Renishaw guy so I'd thought I'd ask this here.

 

We need to probe the inside of a box that is skewed in the machine. The XY Theta Corner function only probes the outside of the part, not the inside. Is there an alternate way to set this angle?

[specv]

Do they have the Inspection plus software? if so they can use O9515 internal corner program. Using and I and a J assumes that the inside corner is not @90 degrees so it will take 2 hits on each internal edge and project the actual corner.

 

I is an incremental distance along the x axis from the first hit to the second.

J is an incremental distance along the y axis from the first hit to the second.

[Guest]

Thanks, I will pass this on and find out

[Russh67]

John:

 

If he has a HAAS, I have a copy of inspection plus book in .pdf i'll share...

[Guest]

Thanks Russ, no he has a Mazak

[specv]

Any luck?

[Tinhman]

What kind of control? Matrix or fusion??

I have a pdf book.

send me a email if you want it.

[Mark Baker CNC Software]

We need to probe the inside of a box that is skewed in the machine.

John, it depends on the control. Some controls doen't support probing in a G68 rotation.

 

If the control does't support this (our VF1 doesn't) then any probing would need to be done before the G68 rotation is active.

[Chris Rizzo]

If he has a HAAS, I have a copy of inspection plus book in .pdf i'll share..

 

If you don't mind...I would appreciate it.

[Jeremy Herron@DBS Solutions™]

 

If he has a HAAS, I have a copy of inspection plus book in .pdf i'll share...

 

If it is not too much trouble, I would like a copy of the Haas on as well.

[chris m]

Chris Rizzo, you have mail

 

Jeremy, send me an email: cmoffattATharmonicdriveDOTnet

 

The forum won't let me email [2] people within 15 minutes

[Jeremy Herron@DBS Solutions™]

Thanks Chris!

[Russh67]

I am sorry I haven't checked this forum in a while

 

If you didn't already get it:

 

HAAS Inspection Plus