M08 in canned text mpmaster.pst

[Darin]

Hello,

 

I have a mpmaster.pst that I have been editing for my Mazaks.. I noticed a issue when I use the same tool and select M00 and M08 in the canned text.. It posts the M00 fine but I can't get it to post M08.. Is there a trick to this?

 

 

The way it posts now..

 

N200 M08

N210 T2 M06 (1-1/4 WALTER FACEMILL)

N220 (MAX - Z1.)

N230 (MIN - Z-.2362)

N240 G00 G17 G90 G55 X0. Y.75 S1800 M03

N250 G43 H2 Z1.

N260 Z.2

N270 G94 G01 Z-.1181 F25.

N280 Y0. F20.

N290 Y-1.4699

N300 Y-2.2199

N310 G00 Z1.

N320 (MILLS SECOND FLAT WITH 1-1/4 WALTER FACEMILL)

N330 Y.75 M00 <--------------------------------------------------- Need a M08 after here somewhere -------------------------------->

N340 S1800 M03

N350 Z.2

N360 G01 Z-.2362 F25.

N370 Y0. F20.

N380 Y-1.4699

N390 Y-2.2199

N400 G00 Z1.

N410 M09

N420 M05

N430 G91 G28 Z0.

N440 G28 Y0.

N450 G90

N460 #3901=#3901+1

N470 M30

[K2csq7]

.

[K2csq7]

Just noticed your posting 2 ops with the same tool there. It is on from the first op and never got shut off.

It won't let you post another M08 until it sees a M09....

[Darin]

Just noticed your posting 2 ops with the same tool there. It is on from the first op and never got shut off.

It won't let you post another M08 until it sees a M09....

 

 

Great thanks that worked.. I thought since the M00 shuts everything down that I won't have to post M09 then M08...

 

New code

 

N160 G00 G17 G20 G40 G80 G90

N170 G91 G28 Z0.

N180 (MILLS FIRST FLAT WITH 1-1/4 WALTER FACEMILL)

N190 (COMPENSATION TYPE - OFF)

N200 M08

N210 T2 M06 (1-1/4 WALTER FACEMILL)

N220 (MAX - Z1.)

N230 (MIN - Z-.2362)

N240 G00 G17 G90 G55 X0. Y.75 S1800 M03

N250 G43 H2 Z1.

N260 Z.2

N270 G94 G01 Z-.1181 F25.

N280 Y0. F20.

N290 Y-1.4699

N300 Y-2.2199

N310 G00 Z1.

N320 (MILLS SECOND FLAT WITH 1-1/4 WALTER FACEMILL)

N330 M09

N340 Y.75 M00

N350 M09

N360 S1800 M03

N370 M08 <--------------------------------------- Looks good ------------------------------>

N380 Z.2

N390 G01 Z-.2362 F25.

N400 Y0. F20.

N410 Y-1.4699

N420 Y-2.2199

N430 G00 Z1.

N440 M09

N450 M05

N460 G91 G28 Z0.

N470 G28 Y0.

N480 G90

N490 #3901=#3901+1

N500 M30

[K2csq7]