Verify not finishing all the tools

[Thee Rickster ™]

Not sure if this only happens in a toolpath group with a stock model or not.

 

Start verify and it stops on the 3rd or 4th tool and says it 100% done.

 

restart fixes it no problem and saving is not an issue, as its just not running all the tools in the group

but when the file reopens there will be a dirty path that wasent there before.

(happend about 4 times so far)

 

any body have this issue or a solution?

 

Regards

Rick

[Thee Rickster ™]

Twice today

[Jeremy Herron@DBS Solutions™]

Are you selecting the stock model operation when you select the other toolpaths to verify?

[Thee Rickster ™]

Yes

 

I think when i have a stock model and I changed thing and reprocess them all

even though my rest roughing path is green , it processes before the stockmodel, and is actually dirty...possibly.

[Jeremy Herron@DBS Solutions™]

This is possible. I do not select my stock model operations with my toolpaths for verify, and I have not seen this. Give that a try and see if the problem persists. Just a thought.

[Thee Rickster ™]

Will do , thanks