Post question.

[danielm]

(*---------------------------*)

(T42 = .625 X .4 X .122RAD INSERT 2FLT CUTTER)

(T26 = .5 BALL INSERT_RA216F-13O13S-026 P20A)

(T25= .500 X 1.0 X 1.2OOH 4FLT TAILN CEM)

(T24= 1.0 X 4.12 X 4.3OOH 5FLT NIAGARA TIALN FINISH EM)

G0 G17 G20 G40 G80 G90

G0 Z30

(ROUGH CLEVIS SUPPORT TO .125 THK B0)

M08

IF[VATOL EQ 42] N1

T42 M06

N1 (.625 X .4 X .122RAD INSERT 2FLT CUTTER) <=== Need this line to be N42 (.625 X .4 X .122RAD INSERT 2FLT CUTTER)

(TOOLPATH - M.ROUGH..........)

(STOCK LEFT ON WALLS = 0.)

(STOCK LEFT ON FLOORS = 0.)

G15 H68

G0 G90 X9.7746 Y1.341 B0. S3972 M3

G56 H42 Z1.3221

T26

 

 

 

Thanks!!!

[K2csq7]

Use the debugger to find where the offending line is being output from, just above it in the post put...

n$ = t$