N munbers

[ttran]

hello,

 

i need some instruction on how to get rid of these n numbers when posting.

 

thanks in advance.

 

 

0001(GAMAJET 8-531-R)

(CREATED 07/24/12 - 9.11AM)

(TOOL#12 - 80 DEG. TT - .015 RAD.)

(TOOL#10 - 1.00 DIA DRILL )

(TOOL#8 - BORING BAR - .015 RAD.)

(TOOL#4 - .125 CUT-OFF TOOL )

N100 G0 G40 G99

N110 T1212

N120 M5

N130 G0 X1.47 Z.0328 M8

N140 X2.6734 Z1.4499

N150 G97 S1000 M3

N160 Z0.

N170 X1.95

N180 G1 X-.0712 F.01

N190 G0 Z.1

N200 X1.6375

N210 Z.21

[Pilot Plant Supervisor]

You can remove block numbers in the editor under the edit tab.

[MLS]

Should be a setting in the control definition under NC output for sequence numbers.

[K2csq7]

Should be a setting in the control definition under NC output for sequence numbers.

There is, you may need to restart mcam after changing it for it to take effect.