G40 OFFSET CONFLICT

[killall-9]

Hello,

 

I am using a Taper tool to do a countour. Do "Tweak" the wall in, i use a G41 and perfect my Diameter offest. MasterCam X4 MPMASTER is spitting out the G40 on the wrong line, i'm sure the coordinates its giving arent correct either. so on the last movement it tapers out to where it should be (Thus taking out my wall).

 

The movement described has a lead in to a movement in a corner and then out.

 

 

G94 G01 Z-.222 F15.

G41 D9 X.3321 Y-.038

G03 X.2486 Y.1194 I-.1204 J.0369

G01 X-.2886 Y.2841

G40 X-.1048 Y-.2831

Z-.122

[Craig-B]

Check the lead in/lead out angles, Length, and if you are perpendicular or tangent. You may also want to check the box on your lead out to (Retract before last move).