fanuc 10T help post

[cormigu]

Hi everyone,

Does anyne know how to modify a post processor to control fanuc 10T , which where the X is negitive .

Thank you

[Chris McIntosh]

Are you just trying to flip the sign on your X-axis output?

 

At the top of the post are the parameters for controlling coordinate output based on the cuttype:

 

#Columns- ABCDEFGH.IJKLMNOPQ #Turret/Spindle #Path Type

scase_tl_c1 : "10000222.100100100" #Top turret/Left spindle, Turning cut

scase_tl_c2 : "10000012.000000000" #Top turret/Left spindle, Right Face cut

scase_tl_c_2 : "10110012.000000000" #Top turret/Left spindle, Left Face cut

scase_tl_c3 : "10010102.000000000" #Top turret/Left spindle, Cross cut (cuttype = 3)

scase_tl_c3r : "10001102.000000000" #Top turret/Left spindle, Reverse Cross cut (cuttype = -3)

scase_tl_c4c : "10000222.000000000" #Top turret/Left spindle, Y axis subs. Cycle

scase_tl_c4 : "10000122.000000000" #Top turret/Left spindle, Y axis subs.

scase_tl_c5 : "10000222.000000000" #Top turret/Left spindle, Multisurf Rotary

 

Specifically you will need to look at the I,L,O parameters as they are tied to the X-axis direction:

# I - Plane 0, X axis, 0 = normal, 1 = switch sign from basic

# L - Plane 1, X axis, 0 = normal, 1 = switch sign from basic

# O - Plane 2, X axis, 0 = normal, 1 = switch sign from basic