help with pro-e file

[Robert Ouellette]

i need some help. our custumer sent us a new pro-e file and i can not open it. our version of pro-e will not save as some thing i can open in mc4,mc5, mc6. it is locked or so our drafting guy says. can someone help a guy out and have a look at this for me? i can email you the zip file. i would need it saved as a x4 or x5 if possible.

 

thanks

proe_3719-1208_main_05_0.zip

[cadcam]

Here you go this also contains X6 files

proe_3719-1208_main_05_0.zip

[Brad St.]

Hope this works for you.

 

HTH

Brad

3719-1208.MCX-5

[Robert Ouellette]

thanks guys will look right now to see if they are good.

[Robert Ouellette]

turns out the file they sent was not the right one. it is a much older version and not to be used. so i had to get them to send me a print i could actually read and draw it all from scratch. but thanks anyways guys. it worked great.