Stock File Directory

[Rotary Ninja]

When I create a solid and save it as an STL to use for my stock then point to that file in my stock setup and in the verify stock setup windows for the first time all is well. But the next time I load the same part program the stock file that is listed in the verify window is one I created months ago and i have to reselect my stock file. Is there something I am not doing right?

[Pilot Plant Supervisor]

Same on my end. Also, the STL compare stays active and I have to turn it off for every new part I verify.

[Rotary Ninja]

If you turn that off, then save your configuration it will stay turned off.

[Rotary Ninja]

Umm. I may have just answered my own question.

[Pilot Plant Supervisor]

Hmmm, I'll give that a try.

[Rotary Ninja]

Yeah, it does the same thing as just changing it in the configuration settings... Click the "+" next to "Verify Interface" then click "Verify Settings"

 

Uncheck "Compare to STL file" and hit the Blue + sign at the bottom. Click YES to save then click OK (green check of course).