Screen information font size

[John Morris]

I feel like this should be simple but I cannot find the setting. Can I change the size of the font used to print the “Screen information” and “Name and date” when I print from MC?

[LancoUSA]

right click on the information box and it will give you a choice of three font sizes.

[LancoUSA]

Sorry. I think i misunderstood what you wanted to change the font size of.

[CJep]

John,

In the system config there is a page to setup the printing attributes,....

 

Don't forget to open a new file in Mcam before you make changes to the system config.

 

Other than the line weight I don't see a way to affect the font or size of the font for the coordinate system or file name information.

Edited February 12, 2013 by CJep @ Prismeng

[CJep]

What you could do if you're wanting to change the font or font size would be to create the information as a note on another level then do a print screen of that.

[John Morris]

Chris,

 

I do use drafting note a lot but I like the fact that MC automaticlly prints the file name and path along the top of the sheet. If i put in a note then I have to type it in or paste it into the note.

 

I have noticed that other computers around the shop print with different size font, I just need to find what is different in those setups than mine.

[John Morris]

Guys, Thanks for the input. As it turns out the screen resolution is the key. The larger the screen resolution the smaller the font appears on the print out.