how changed rotary post

[rafal79]

Hello everyone.

 

I've just small problem with my post and would like to get l help.

What I should change in my post to get post program for 4 axis toolpat with "A axis, with degree between 0-360"

 

Below is the fragment of my program and my problem,I hope is clear.

 

 

 

 

X175.724 Z18.303 A356.668

X176.007 Z18.352 A357.966

X176.288 Z18.411 A359.258

in this part A axis should start from 0

 

X176.569 Z18.479 A360.544 F971

X176.569 Z18.479 A361.544 F971

 

 

Thanks for help.

Raf

[Ben Wood]

I would check the machine definition first. In the machine definition double click on the A axis in the machine configuration and check the travel limits.

[rafal79]

How sholud be set ,my are set min travel limit -360000.0 , max travel limit 360000.0, and axis supports continonus positionig ,

type :signed continonus, but if I changed to :signed direction,absolute angel (0-360) and post give me something like this and still with the same problem:

 

 

 

X229.402 A--358.087

X228.761 A--358.265

X228.119 A--358.443

X227.477 A--358.621

X226.836 A--358.799

X226.194 A--358.977

X225.552 A--359.155

X224.91 A--359.333

X224.269 A--359.511

X221.855 A--360.18

 

 

If I changed travel limits min to 0 and max to 360 i have error 'warning -rotary limits exceeded.

 

 

 

A--395.313 F430

X229.629 A-393.156 F300

X245.672 A-388.706

[Ben Wood]

I am not sure where they should be set. I am still trying to get mine to output correctly. I have been getting the warning rotary limits exceeded error with every setting I've tried so far. I am beginning to think it is something in the post.