decelerate at inside corners

[cbmarco]

What is the best method to use to decelerate the feed at the inside corners when contouring? I would like to get mastercam to post my program with alternate feeds without having to go back and type the feeds in manually at every G3. Is there a way to tag the geometry where you want the slower feed to take place maybe?

[GIZMO 21]

Try this.

 

http://www.emastercam.com/board/index.php?showtopic=72222&hl=

[cbmarco]

Thanks. That was what I was looking for. Worked great.