X7 changing tool diameter bug

[Smrk]

I noticed a bug when changing tool diameter.

 

- i create any operation with one tool

 

- in second operation i would like to program toolpath with smaller tool diameter with same number (making gap on electrodes)

 

- so i select tool -> choose edit -> change tool diam. -> save -> in pop-up window select "create new tool"

 

Problem is, that result of this are two identical tools (with smaller diam.) X7 create new tool, but change diam. of both tools. First operation become dirty.

[Thee Rickster ™]

Can you send it in to [email protected]?

Thanks

 

:edit:....

[dforsythe]

Can you send it in to [email protected]?

Thanks

 

[email protected]

[Smrk]

I am not at work at the moment, but i ll send it tomorrow in the morning. I think it is not file dependant, because it happens everytime.

You can try it. Double click on tool in any operation parameters window, change tool diam. and select "create new" I tried it 3 times (change from diam. 4 -> 3 and 3 -> 2) and it always change both diameters (source tool and new one)

[Alien]

I noticed a bug when changing tool diameter.

 

- i create any operation with one tool

 

- in second operation i would like to program toolpath with smaller tool diameter with same number (making gap on electrodes)

 

- so i select tool -> choose edit -> change tool diam. -> save -> in pop-up window select "create new tool"

 

Problem is, that result of this are two identical tools (with smaller diam.) X7 create new tool, but change diam. of both tools. First operation become dirty.

Hi,

I have this problem too.

Here link to topic, that I started two week ago.

You can find there solution for this issue.

http://www.emastercam.com/board/index.php?showtopic=73008

Good luck!

Sincerely,

Michael.

[NOTW Programmer]

You should try right click->create new tool->edit diameter. Its a workaround !

[Smrk]

if you go to edit tool by right click - it works

if you go to edit tool by double click - it doesn't work