Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Converting Mazak to Inches


Recommended Posts

I suggest getting in touch with your local Mazak tech center, they offer phone support to any Mazak owner. You will benefit from a good relationship with them...

 

This may be only 1 of many that need to be checked/changed....

What is parameter P19 set to?

 

"P19

Selection of unit system between mm/inch

(metric or inch)

0 = Minimum command unit=0.001 mm

1 = Minimum command unit=0.0001 inches"

 

Books are available from Mazak. You could probably get a set of books on a CD (pdf format).

Link to comment
Share on other sites

I ran into this problem a couple years ago. Mazak had to come out and change hundreds of parameter settings. It took the guy two days to get it done. He was changing them manually. He said they did not have the inch parameters for that machine on a disk. I would have tried harder to find them on a disk somewhere - Japan maybe.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...