missing toolpaths

[riverracer]

we have X6 mill level 3 and solids at work

 

trying to machine an electrode at the moment and went to use high speed paths on the solid.

when i click on toolpath it says that path is not in opps folder. (cannot remember the exact wording, at home atm)

tried roughing and finishing paths, no joy

dynamic dosent do anything either.

 

am i missing something or doing it wrong?

 

or is something missing with our install?

 

i'm sure i have used them b4.

we have had X3 thru to current X6 level 3 n solids.

 

thanks

[CJep]

Did you have an operations default file from a previous version that you tried to bring into McamX6?

[riverracer]

unsure if we had the opps default from X5 migrated over, our IT dept did all that upgrading.

the post is the only thing i know of that was copied over

 

error says "whatever cutter path" not found in your opperation defaults

c/user/pub/doc/shared.mcx6/mill/ops/mill_mm.defaults.6

 

how do we fix?

or is a re install required?

 

thanks

[Oscar R.]

I remeber seeing this before. I'm almost sure it had something to do with the way you did your install but everything should be there.

You should be able to just click through that message and continuewith your toolpath creation.