Opening an STL File in verify

[Radical1]

Hello all sorry for the seemingly dumb question but not sure how to open an STL file in verify in X7. I am pretty sure that it was discussed in the forum before but a search did not turn up anything very useful. It takes way too long to verify all toolpaths over again just to verify the finsih toolpath.

 

Thanks in advance

Richard

[Jayson Kramer]

to setup for your file in X7 you need to go under your Operations Manager at the top there is a button for Backplot/ verify options go there to set the file option and pick your STL file.

[Radical1]

Thanks Jay, having a rough go with X7, but I am trying.