Program not found

[BenK]

I have two Makino E33's with the pro5 control. When I use the data center to run my programs I will get an error "program not found" occasionally. Any ideas what I can do to resolve this?

[Guess_who]

I am not familiar with the E33's, but we do have a bunch of NX51's, A88's, and two D500's.

 

Are you referring to the data server? When does it give you this error? When you search for the program or when you trying to use the M198 P????.

[BenK]

It will happen when I'm in the middle of running the program. I run programs of the network using the Makino Data Center during the day so I don't have to transfer everything into the internal card. The Data Server is an internal card where the Data Center runs the program from a network.

[Guess_who]

Sorry Benk, I'm not familiar with the data Center.

 

We run most everything off the MAS system, and we sometimes use the data server for large programs.

 

Sorry, I don't think I can help.

 

Good luck.