How can I stop Repositioning/revolving toolpath when posting

[Rob_Bish]

How can I stop the repositioning when posting of the A axis. I require the A axis to be A90. the way the toolpath has been defined and all movements to be in Y not as currently as output in X when posted. It seems to have revolved the toolpath to A0. not what is required.

 

The orientation is correct in the MC7 WCS and planes.

 

 

 

 

 

 

 

N100 T97 M6 ( 40MM BY 1MM SAW )

( SAW 2ND SLOT )

G65 P8001 A0. B0.

G0 G55 G90 X1.7323 Y-1.489

S350 M3

G43 H97 D97 Z1.5

M08

/M494

Z1.

G1 Z-.02 F2.

X.315

X.1788

X-1.5535

Z.18

G0 Z1.

[crazy^millman]

The orientation is correct in the MC7 WCS and planes.

 

So you have a top WCS and then a right T-Cplane and get this issue? Are you looking to the mi9 or mi10 to control positive and negative output for your primary or secondary axis?

[Rob_Bish]

Yes its a top wcs and a T-Cplane positioned and saved to the machining position (as looking down drom the spindle). B position is correct. A0 should be A90. and movement in Y direction not in X.

[crazy^millman]

Got a .z2g sample of this can share? I would think if you have always done it this way it should stay this way. Only thing I can think of without more information is what is going on with the mi9 or mi10 or possibly some other switch that might be forcing things in your post???