Mastercam X5 in HP Pavilion DV6 (Laptop).

[tenko]

Hi, I´m newbie in Mastercam X5, I´m be able to run de program in my HP Pavilion DV6 laptop, but when I try to paint a single line, the line is not painted, but when I click in "regenerate the display list into display menu" or "shift+ctrl+r" the line appears... any suggestions?

 

Thanks in advanced...

[tenko]

The laptop video card .. "Intel Graphics Media Accelerator 4500MHD"

[gcode]

Mastercam and Intel Graphics are not compatible

You may get marginally acceptable results by changing your video settings

Go to

Settings

System Configuration

Screen

Turn on GDI

and Disable hardware acceleration.

This may get it to work but performance will be poor.

[tenko]

Mastercam and Intel Graphics are not compatible

You may get marginally acceptable results by changing your video settings

Go to

Settings

System Configuration

Screen

Turn on GDI

and Disable hardware acceleration.

This may get it to work but performance will be poor.

 

Thanks for your quickly reply... I will try this settings...

[Chris Rizzo]

Also,

 

Right click on Computer > Properties > Advanced System Settings > Advanced Tab > Performance > Adjust for best performance.

[tenko]

Also,

 

Right click on Computer > Properties > Advanced System Settings > Advanced Tab > Performance > Adjust for best performance.

 

Eureka .. my problem disappear with this system settings ...

Thank you very much Chris... great post...