Mass Editing

[buck30]

I am using Pro Drill on a lot of holes on the 4th axis and on a tapered surface.

Works great but gives me a lot of operations. I wont to make the Peck value less aggressive in each of these operations for the 1mm drill I am using.

So anyone know how to mass edit this value???

Editing common parameters doesn't work. Nowhere to even try this there.

Thanks for help anyone.

 

 

and I am still in X6.

[djstedman]

I could be wrong but I don't think there is a way to do that, at least not that I know of.. I know its not what your looking for but find and replace in the editor would probably work pretty easy..

[alancopp]

Would it work to set the amount of peck in the tool parameters. And then set '' Use tool's step ,peck and coolant " in Machine Group Properties tool settings tab.

[buck30]

Thabks guys. and yes djstedman i ended up following your advice. Worked well with that unique "Q" in the G code.

Wopulkd be great if it could be changed in mass in MC though.

 

Tool Parameters????? when you create a tool alancoop??? Sorry i not sure where the tool parameters are???