subroutine post question

[cherokeechief79]

i have a post that worked perfectly in mc 9 for my haas. our mc retailer at the time tweaked it perfectly for our needs in our shop.we used g97 local subs and this post output perfect code that i could depend on 100% everytime.i did the conversion to bring it up to date in mc 10.6 and everything works just as it did in 9 but i always went to the 1st op in the operations and would go to misc values.here i would select starting work coordinate (g54 etc) ,if the sub was to be in inc or absolute,and how many repeats. the feilds used to be labeled as this but now its just misc integer 1,2,3 etc.it works but i just have to remember where things were.can i change this somehow?

[Guest]

The fields are labeled if you open the post processor at the very bottom of the post

 

Sight unseen I can't tell you exactly which fields they were but that's where you can locate them

[K2csq7]

The fields are labeled if you open the post processor at the very bottom of the post

 

Sight unseen I can't tell you exactly which fields they were but that's where you can locate them

 

Can you change the text through the control def?

[Guest]

Can you change the text through the control def?

 

You can but.......

 

In this case it's evident his control def IN his post is messed up, so adding it in there might create an even bigger issue

 

I would recommend cleaning the control def up in the post

[cherokeechief79]

^{thank you! ill try that!}