STL visual in Simulator

[Rawbn_Hood]

I finished programming my part's first operation and saved the STL. I started my second op and used the STL for the simulation but it looks like I took a chainsaw to it.

I've tried playing with the speed and precision bars before I save it. Has anyone found the right combination? Or an "Awesome Aesthetics" button?

All suggestions are much appreciated!! Thanks in advance

[mcpgmr]

Did you try precision zoom?

[Matthew Hajicek - Singularity]

Looks like a matter of STL tolerance. This is a fairly small part I presume? You might try using Stock Model instead of saving STL's.

[Product Manager CNC Software]

Rawbn Hood: Two things to try, first you can set your tolerance for the saved model out of simulator by going to the File/Options page. This may help with the saved Model, second when reading the model in, you have control of the incoming tolerance on the Backplot/Verify Options page located on the Operations Manager toolbar. Also, as Matthew suggested, we have been a lot of progress with the new Stock Model tool and it has its own stl compare feature. Its definitely worth checking out.

[Rawbn_Hood]

Thank you fellas!! Tolerances helped a bunch. I'll have to play around with the Stock Model tool, I've never tried it.

Are there any secrets or tricks with that I need to know before diving in?